Filter Results:
Filter by Pivot Size:
Filter by Inside Diameter
Filter by Outside Diameter
Pivot Thrust Washers
 More Information |
Pivot Size | Material |
| .125″ | Stainless | |
| Inside Dia | Outside Dia | |
| .130″ | .260″ | |
| Thickness | Heat Treated | |
| .020″ | HRC 59-60 |
| # Pcs | Price | Quantity | Stock |
|---|
| 20 | $20.00 |
-
+
|
8 | ||
| 200 | $100.00 |
-
+
|
10 | ||
| 2000 | $900.00 |
-
+
|
1 |
Thrust Washer - .125" ID
| Inside Diameter: | .130" |
| Outside Diameter: | .260" |
| ID & OD Tolerance: | +-.005" |
| Thickness: | .020" |
| Heat Treated: | HRC 59-60 |
| Material: | Stainless Steel |
We designed these thrust washers to be used with caged bearings. The balls in the caged bearing roll on a smooth flat surface. The washers can be used in a pocket of titanium, carbon fiber or G10. The washers are thick enough to resist cupping.
Some knifemakers use the washers without bearings. The washers are finished to a very high grit and then polished. This makes the knives have a smooth action.
 More Information |
Pivot Size | Material |
| .187″ | Stainless | |
| Inside Dia | Outside Dia | |
| .192″ | .390″ | |
| Thickness | Heat Treated | |
| .020″ | HRC 59-60 |
| # Pcs | Price | Quantity | Stock |
|---|
| 20 | $22.00 |
-
+
|
2 | ||
| 200 | $110.00 |
-
+
|
18 | ||
| 2000 | $990.00 |
-
+
|
2 |
Thrust Washer - .187" ID
| Inside Diameter: | .192" |
| Outside Diameter: | .390" |
| ID & OD Tolerance: | +-.005" |
| Thickness: | .020" |
| Heat Treated: | HRC 59-60 |
| Material: | Stainless Steel |
We designed these thrust washers to be used with caged bearings. The balls in the caged bearing roll on a smooth flat surface. The washers can be used in a pocket of titanium, carbon fiber or G10. The washers are thick enough to resist cupping.
Some knifemakers use these washers without bearings. The knifemaker finishes the washer to a high polish. This makes the knives have a smooth action.
 More Information |
Pivot Size | Material |
| .250″ | Stainless | |
| Inside Dia | Outside Dia | |
| .255″ | .455″ | |
| Thickness | Heat Treated | |
| .020″ | HRC 59-60 |
| # Pcs | Price | Quantity | Stock |
|---|
| 20 | $23.60 |
-
+
|
17 | ||
| 200 | $118.00 |
-
+
|
19 | ||
| 2000 | $1,062.00 |
-
+
|
1 |
Thrust Washer - .250" ID
| Inside Diameter: | .255" |
| Outside Diameter: | .455" |
| ID & OD Tolerance: | +-.005" |
| Thickness: | .020" |
| Heat Treated: | HRC 59-60 |
| Material: | Stainless |
We designed these thrust washers to be used with caged bearings. The balls in the caged bearing roll on a smooth flat surface. The washers can be used in a pocket of titanium, carbon fiber or G10. The washers are thick enough to resist cupping.
Some knifemakers use the washers without bearings. The washers are finished to a very high grit and then polished. This makes the knives have a smooth action.