Vibra Tite vs Thread Lockers

Vibra-tite VC-3 vs Thread Lockers

Vibra-Tite VC-3 is a different kind of thread locker/sealer. Most thread lockers are only good for one use. As soon as the screw is turned, the thread locker is broken and must be reapplied. Screws assembled with VC-3 can be disassembled and reassembled up to five times without reapplying. This means you can adjust pivot screws without worrying about the screw coming loose later. This makes the perfect thread locker for knifemakers.

VC-3 is a blend of acrylic resins. Apply VC-3 to threads and allow to dry for 30 minutes. After the locker/sealer dries the fastener is ready to use.

We recommend thinning VC-3 50/50 with methyl ethyl ketone (MEK) when using on small screws.

See our Vibra tite VC3 for sale:


Leave a Reply

What you see is what you get: If an item appears on a page, it is available for purchase! If you don't see what you're looking for, it's not currently in inventory. Dismiss